Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
2 - OPERATION
Maintenance operation commands
SPI :
SDH Physical Interface
2s laser restart on operator action
9s laser restart on operator action
ALS enabled/disabled (equipment global functionality)
Line loopback enabled/disabled (transparent type)
Equipment loopback enabled/disabled (transparent type)
MSP : Multiplex Section Protection
Operator command for MSP protection
Clear
Lockout of Protection
Forced Switch to Working
Forced Switch to Protection
Manual Switch to Working
Manual Switch to Protection
LPC :
Lower order Path Connection
Operator command for SNC protection of VC12 or VC3 path (per path and in order of priority):
Clear
Lockout of Protection
Forced Switch to Working
Forced Switch to Protection
Manual Switch to Working
Manual Switch to Protection
PPI :
PDH Physical Interface
Line loopback enabled/disabled (transparent type)
Equipment loopback enabled/disabled (transparent type)
ADRLAN Card
LAN statistics (display and reset)
VC3 # i statistics (display and reset)
Flow control (display and reset)
Interface status-(separate graphical SDH/WAN status display)
SETS : Synchronous Equipment Timing Source
Protection operator command
Clear
Lockout of Protection
Forced Switch
Manual Switch to Protection
Installation and User Guide - N56717020104
Page A2-10
No reproduction or communication without the written consent of SAGEM SA
Monitoring commands according to the functional blocks
Table 2-9- Commands (1/2)
Publicité
Chapitres
Table des Matières
