Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
2 - OPERATION
Configuration parameters per functional blocks
ADR FAN card
Fan operation mode selection
"Permanent cooling" :
Fan is ON, if T°> 5°C (41°F) , fan is OFF, if T° ≤0°C (32°F)
"Overhead Avoidance" :
Fan is ON, if T°> 35°C (95°F), fan is OFF, if T° ≤30°C (86°F)
Equipment
Session
Equipment Name
Selection of clearance level :
Administrator
Operator
Observer
One password by clearance level
(Only the administrator may modify password)
Authorization to transmit traps to the management:
"Traps Managers List"
Managers list
"Managers List" (10 addresses possible)
Authorised maximum clearance (exclusive choice)
Equipment date and time
Status of slots A, B, C, D
expected card configuration
Monitoring
Monitoring of modules
A no-monitored card is indicated in the equipment view; not monitoring a
card inhibits the entire management of the faults related to this card
(card and port)
Subrack Monitoring (Motherboard)
Monitoring of ports
Not monitoring a port inhibits the entire management of the faults and
performance related to this port
Putting a card into/out of service
(The card is ignored by the management function)
Installation and User Guide - N56717020104
Page A2-8
No reproduction or communication without the written consent of SAGEM SA
Table 2-7 – Configuration parameters (7/8)
Default
value
"Overhead
Avoidance"
Empty
Admin
No password
0.0.0.0
0.0.0.0
supervisor
"01/01/1970"
ADR Optical,
if absent card
Inserted card
if present
Monitoring
Monitoring
No Monitoring
for LPOM blocks
Monitoring
for others
Into Service,
if present card
Out of service,
if absent card
Publicité
Chapitres
Table des Matières
