Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
The screen displays the management routes already defined with their characteristics:
> Hops : hop 1, 2, 3...Path used to go from one machine to another.
> IP address : IP address of destination equipment (equipment or sub-network).
> Delay (ms) : round trip time.
$ Unit. size : Maximum size of IP packet which can reach the remote equipment.
1.4.3 - Using HTTP navigator
1.4.3.1 - First commissioning
The PC is connected via Ethernet (the PC's gateway must be in the same subnetwork as the
Ethernet interface of the ADR).
!
Start the NESCAPE application
!
On the Welcome screen, fill in the "Address" field with the IP address of the ADR155C
equipment.
WARNING : With NESCAPE 4.5, the equipment IP address should include no non-significant '0'.
Example: "http://135.11.9.30/" instead of
!
If a screen with a 860 x 600 resolution is used, reduce character to obtain correct pages
display (for example, 'synchronization' page must display 3' 'Apply' buttoms.
!
The navigator welcome screen "Welcome to the ADR155C's site" appears.
!
On the first commissioning, the password is empty; click on Apply to access "ADR155C shelf
view" screen.
!
From that moment, the navigator is operational.
No reproduction or communication without the written consent of SAGEM SA
1 - INSTALLATION AND COMMISSIONING
2
1
http://135.11.09.30/
Installation and User Guide - N56717020104
3
Page A1-29
Publicité
Chapitres
Table des Matières
