Sagem ADR 155C Guide D'installation Et D'utilisation page 37

This screen is also used to:
!
activate the common functions of the equipment, such as the synchronization, safety, traffic
information, etc. by clicking on a function in the menu bar; see tree structure of the general
menu, Figure 1-12.
! access the functionalities related to a module in particular (for example, MSP protection in
the case of an ADR Optical module) : click on the module to be selected, the selection arrow
is blinking and its specific menu appears; see the tree structure of "card" menus in Figure
1-12;
! view the own characteristics of a port (connections performed, configuration of connections,
alarm states ...), by selecting the relevant connector.
For each function viewed, the configuration parameters, operating commands, active
parameters and alarm states are grouped together on the same screen, with the various actions
possible being accessible or not by the operator according to his/her clearance level.
The upper edge of the navigator window recalls the equipment IP address, the clearance level
acquired and, if required, the slot concerned.
No reproduction or communication without the written consent of SAGEM SA
1 - INSTALLATION AND COMMISSIONING
Installation and User Guide - N56717020104
Page A1-31