Safety Notes - geo-FENNEL GeoDist 600LR Mode D'emploi

SPEED MEASUREMENT
Slide switch (9) to the left.
Press button (M) until
Aim at the object to be measured (as centered as pos-
sible) and follow same; meanwhile keep button
pressed until the speed will be displayed.
The more horizontally the measurement is carried out
the more exact the speed will be recorded.
appears in the display.

SAFETY NOTES

INTENDED USE OF INSTRUMENT
The instrument emits an invisible laser beam in order
to carry out the following measuring tasks: measure-
ment of distances, heights and angles.
CARE AND CLEANING
Handle measuring instruments with care. Clean with
soft cloth only after any use. If necessary damp the
cloth with some water. If the instrument is wet clean
and dry it carefully. Pack it up only if it is perfectly dry.
Transport in original container / case only.
SPECIFIC REASONS FOR ERRONEOUS MEASURING
RESULTS
Measurements through glass or plastic windows; dirty
laser emitting windows; after the instrument has been
dropped or hit. Please check the accuracy.
Large fluctuation of temperature: If the instrument
will be used in cold areas after it has been stored in
warm areas (or the other way round) please wait some
minutes before carrying out measurements.
EN
19