Safety Notes - geo-FENNEL GeoDist 50 Mode D'emploi

FR
E

SAFETY NOTES

INTENDED USE OF INSTRUMENT
The instrument emits a visible laser beam in order to carry out the
following measuring tasks: Measurement of distances.
CARE AND CLEANING
Handle measuring instruments with care. Clean with soft cloth only after
any use. If necessary damp the cloth with some water. If the instrument
is wet clean and dry it carefully. Pack it up only if it is perfectly dry. Trans-
port in original container / case only.
SPECIFIC REASONS FOR ERRONEOUS MEASURING RESULTS
Measurements through glass or plastic windows; dirty laser emitting
windows; after the instrument has been dropped or hit. Please check
the accuracy.
Large fluctuation of temperature: If the instrument will be used in cold
areas after it has been stored in warm areas (or the other way round)
please wait some minutes before carrying out measurements.
ELECTROMAGNETIC ACCEPTABILITY (EMC)
It cannot be completely excluded that this instrument will disturb other
instruments (e.g. navigation systems); will be disturbed by other instru-
ments (e.g. intensive electromagnetic radiation nearby industrial facilities
or radio transmitters).
25