Measurement Reference - geo-FENNEL GeoDist 50 Mode D'emploi

FR

MEASUREMENT REFERENCE

SELECT UNITS
MEASURING
When measuring in bright sunshine or to a reflective surface, it is
recommended to use a target plate.
MEASURING A SINGLE DISTANCE
Power on the device with button (15), aim the laser
point at the target and press the measuring button (15).
The measured distance is displayed in the main
measurement line (14).
When the next measurement is carried out the previous measurement
will move up into the previous measurement line.
20
Press button (19) to change the measurement
reference between front / rear.
Display indication
Reference rear: (left)
Reference front: (right)
Press and hold in succession to select the
required measuring unit: m, ft, in.