Area Measurement; Volume Measurement - geo-FENNEL GeoDist 50 Mode D'emploi

Table des Matières

Les langues disponibles

AREA MEASUREMENT

Press button (16) in single distance mode to access the area measure-

ment function. Aim the laser at the first target (i. e. length) and press the

measuring button (15). Aim the laser at the second target (i. e. width)

and press the measuring button (15) once again. The instrument will now

automatically caluclate and display the area.

After approx. 3 sec. the instrument will automatically display the

circumference (below right pic.). = PAINTER FUNCTION.

Press button (16) in single distance mode twice to enter into the volume

measurement function. Aim the laser at the first target (i. e. length) and

press the measuring button (15). Aim the laser at the second target (i.

e. width) and press the measuring button (15) once again. Aim the laser

at the third target (i. e. height) and press the measuring button (15). The

instrument will now automatically calculate and display the volume.

After approx. 3 sec. the instrument will automatically display the wall

size, floor size and the circumference (second pic. from the right)

= PAINTER FUNCTION.

Table des Matières

Table des Matières