Electromagnetic Acceptability (Emc); Safety Instructions - geo-FENNEL GeoDist 600LR Mode D'emploi

EN

ELECTROMAGNETIC ACCEPTABILITY (EMC)

It cannot be completely excluded that this instrument
will disturb other instruments (e.g. navigation systems);
will be disturbed by other instruments (e.g. intensive
electromagnetic radiation nearby industrial facilities or
radio transmitters).
CE-CONFORMITY
This instrument has the CE mark according to
61326-2-2:2013, EN 61326-1:2016.
WARRANTY
This product is warranted by the manufacturer to the
original purchaser to be free from defects in material
and workmanship under normal use for a period of two
(2) years from the date of purchase. During the warran-
ty period, and upon proof of purchase, the product will
be repaired or replaced (with the same or similar model
at manufacturers option), without charge for either
parts or labour. In case of a defect please contact the
dealer where you originally purchased this product. The
warranty will not apply to this product if it has been
misused, abused or altered.
20
Without limiting the foregoing, leakage of the battery,
bending or dropping the unit are presumed to be de-
fects resulting from misuse or abuse.

SAFETY INSTRUCTIONS

· Follow up the instructions given in the user manual.
· Do not stare into the beam. The laser beam can lead
to eye injury.
A direct look into the beam (even from greater
EN
distance) can cause damage to your eyes.
· Do not aim the laser beam at persons or animals.
· The laser plane should be set up above the eye level
of persons.
· Use the instrument for measuring jobs only.
· Do not open the instrument housing. Repairs should
be carried out by authorized workshops only. Please
contact your local dealer.
· Do not remove warning labels or safety instructions.
· Keep the instrument away from children.
· Do not use the instrument in explosive environ-
ment.
· The user manual must always be kept with the
instrument.