geo-FENNEL GeoDist 600LR Mode D'emploi page 18

EN
GOLF TRAJECTORY MODE
Slide switch (9) to the left.
Press button to carry out a single measurement.
Keep button pressed for 2 seconds to start the
continuous measuring mode.
Following information will be displayed:
· distance to the target
· trajectory distance = angle-compensated
distance (i. e. an upward slope or a descent)
· slope angle
18
GOLF TRAJECTORY SCAN MODE
Slide switch (9) to the left.
Aim at the target and press button (M) until the flag-
pole symbol flashes .
Now slowly scan both sides of the target; after 1,5
seconds the flagpole symbol stops flashing.
Following information will be displayed:
· distance to the target
· trajectory distance = angle-compensated
distance (i. e. an upward slope or a descent)
· slope angle