geo-FENNEL GeoDist 600LR Mode D'emploi page 17

DISTANCE, HEIGHT AND SLOPE ANGLE
MEASUREMENT
Slide switch (9) to the left.
Aim at the target and press button (M) until
appears in the display.
Press button to carry out a single measurement.
Keep button pressed for 2 seconds to start the
continuous measuring mode.
Following information will be displayed:
· distance to the target
· height
· slope angle
VERTICAL HEIGHT MEASUREMENT
Slide switch (9) to the left.
Press button (M) until
Aim at the highest point of the object to be measured
and press button . Aim at the lowest point of the
object to be measured and press button
Following information will be displayed:
· height of the object to be measured
· slope angle
EN
appears in the display.
.
17