Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Table of Contents
1.
Scope of delivery....................21
2.
Machine overview...................22
3.
Please Read First! ..................23
4.
Safety Instructions .................23
4.1
Specified Conditions of Use .....23
4.2
General Safety Instructions ......23
4.3
Symbols on the machine ..........25
4.4
Safety Devices .........................25
5.
Special Product Features ......26
6.
Operating Elements ...............26
7.
Assembly ................................27
7.1
Installing the Legs ....................27
7.2
ON/OFF switch installation.......27
7.3
Blade guard installation ............28
7.4
Fastening to Floor ....................28
7.5
7.6
7.7
Mains connection .....................29
8.
Operation ................................29
8.1
Setting the depth of cut ............30
8.2
Setting the saw blade tilt ..........30
8.3
Sawing with the rip fence .........30
8.4
Sawing with the mitre fence .....31
9.
Tips and tricks ........................32
10.
Care and maintenance ...........32
10.1 Saw Blade Change...................32
10.2 Saw blade alignment ................33
10.3 Drive belt tensioning.................33
10.4 Aligning the riving knife ............34
10.5 Adjusting the saw blade tilt.......34
10.6 Adjusting the Scale...................35
10.7 Adjusting the mitre fence..........35
10.8 Saw storage .............................35
10.9 Maintenance.............................35
11.
Repair ......................................35
12.
Transport.................................35
13.
Available accessories .......36/75
14.
Environment ...........................36
15.
Trouble Shooting....................36
16.
Technical Data ........................37
3.
Please Read First!
These instruction have been written in
a way which facilitates learning of how
to safely operate your saw. Here is a
guide on how you should read these in-
structions:
- Read these instructions before use.
Pay special attention to the safety
information.
- These instructions are intended for
persons with basic technical know-
ledge regarding the operation of a
device like the one described her-
ein. Inexperienced persons are
strongly advised to seek competent
advise and guidance from an expe-
rienced person before operating this
machine.
- Keep all documents supplied with
this machine for future reference.
Retain proof of purchase in case of
warranty claims.
- This device must not be sold or lent
to someone else without being ac-
companied by these Operating In-
structions and all other documents
supplied with the device.
- The equipment manufacturer is not
liable for any damage resulting from
neglect of these operating instruc-
tions.
Information in these instructions is desi-
gnated as under:
A
Danger!
Risk of personal injury or environmental
damage.
B
Risk of electric shock!
Risk of personal injury by electric
shock.
c
Drawing-in/trapping hazard!
Risk of personal injury by body parts or
clothing being drawn into the rotating
saw blade.
A
Caution!
Risk of material damage.
3
Note:
Additional information.
- Numbers in illustrations (1, 2, 3
etc.)
- denote component parts;
- are consecutively numbered;
ENGLISH
- relate to the corresponding num-
ber(s) in brackets (1), (2), (3) etc.
in the neighbouring text.
- Numbered steps must be carried
out in sequence.
- Instructions which can be carried
out in any order are indicated by a
bullet point (•).
- Listings are marked by a dash (-).
4.
Safety Instructions
4.1
Specified Conditions of
Use
This machine is intended to rip and
crosscut grown timber, faced boards,
chip board and wood-core plywood
sheets, and similar wood-derived mate-
rials.
Round workpieces may not be sawed
as they can be twisted by the rotating
saw blade.
Any other use is considered to be not
as specified and not allowed. The ma-
nufacturer is not liable for any damage
caused by unspecified use.
Reconstruction of this machine or use
of parts that have not been tested and
released by the manufacturer can lead
to unforeseen damage and dangers du-
ring operation.
4.2
General Safety Instruc-
tions
When using this machine, observe
the following safety instructions to
exclude the risk of personal injury or
material damage.
Please also observe the special sa-
fety instructions in the respective
sections.
Where applicable, follow the legal
directives or regulations for the pre-
vention of accidents pertaining to
the use of circular saws.
A
General hazards!
Keep your work area tidy - a messy
work area invites accidents.
Be alert. Know what you are doing.
Set out to work with reason. Do not
operate device while under the influ-
ence of drugs, alcohol or medicati-
on.
23
Publicité
Chapitres
Table des Matières
