Changes And Improvements; Operation Capabilities; Conventions; Unpacking/Delivery - Nilfisk SW4000 Instructions D'utilisation

CHANGES AND IMPROVEMENTS

Nilfisk constantly improves its products and reserves the right to make changes and improvements at its discretion without being
obliged to apply such benefits to the machines that were previously sold.
Any change and/or addition of accessory must be approved and performed by Nilfisk.

OPERATION CAPABILITIES

This sweeper has been approved to clean (sweeping and vacuuming) compact and solid floors, in commercial and industrial
environments, under safe operation conditions by a qualified operator.

CONVENTIONS

Forward, backward, front, rear, left or right are intended with reference to the operator's position, that is to say on the driver's seat
(3).

UNPACKING/DELIVERY

CAUTION!
To unpack the machine, carefully follow the instructions on the packing.
Upon delivery carefully check that the machine and its packing have not been damaged during transportation. In case of visible
damages, keep the packing and have it checked by the carrier that delivered it. Call the carrier immediately to fill in a damage claim.
Check that the machine is equipped with the following features:
– Technical documents:
• Sweeper Instructions for Use Manual
• Engine Manual (Honda GX-200)
• Sweeper Spare Parts List
– No. 1 10 A fuse
– No. 1 70 A fuse

SAFETY

The following symbols indicate potentially dangerous situations. Always read this information carefully and take all necessary
precautions to safeguard people and property.
The operator's cooperation is essential in order to prevent injury. No accident prevention program is effective without the total
cooperation of the person responsible for the machine operation. Most of the accidents that may occur in a factory, while working
or moving around, are caused by failure to comply with the simplest rules for exercising prudence. A careful and prudent operator is
the best guarantee against accidents and is essential for successful completion of any prevention program.

VISIBLE SYMBOLS ON THE MACHINE

WARNING!
Carefully read all the instructions
before performing any operation on the
machine.
DANGER!
Internal combustion engine.
Do not inhale exhaust gas fumes.
Carbon monoxide (CO) can cause brain
damage or death.
WARNING!
Do not wash the machine with direct or
pressurised water jets.
WARNING!
X %
Do not use the machine on slopes with
a gradient exceeding the specifications.
03/2013
INSTRUCTIONS FOR USE
1464815000 - SW4000, FLOORTEC R 870
WARNING!
Hot parts, danger of burns.
WARNING!
Moving parts.
WARNING!
Moving parts. Danger of crushing.
WARNING!
Parts under voltage. Presence of
corrosive fluids.
ENGLISH
3