INTRODUCTION
MANUAL PURPOSE AND CONTENTS
This Manual is an integral part of the machine; its purpose is
to provide the operator with all necessary information to use
the machine properly in a safe and autonomous way. It
contains information about technical data, safety, operation,
storage, maintenance, spare parts and disposal.
Before carrying out any procedure on the machine, the
operators and qualified technicians must read this Manual
carefully. Contact Nilfisk-Advance in case of doubts
concerning the interpretation of the instructions and for any
further information.
TARGET
This Manual is intended for operators and technicians
qualified to perform the machine maintenance.
The operators must not carry out operations reserved for
qualified technicians. Nilfisk-Advance will not be responsible
for damages coming from failure to follow these instructions.
HOW TO KEEP THIS MANUAL
The User Manual must be kept inside the machine cab, away
from liquids and other substances that can cause damage to
it.
CONFORMITY CERTIFICATE
Figure A shows a copy of the documentation certifying the
sweeper conformity with the law in force.
NOTE
Two copies of the original EC Declaration of
Conformity are provided together with the
machine documentation.
33015501(2)2006-10 A
All manuals and user guides at all-guides.com
IDENTIFICATION DATA
The machine serial number and model are shown on the plate
(21, Fig. E) affixed inside the cab.
The machine serial number is also printed on the machine
side (23, Fig. G).
The diesel engine serial number and model are marked in the
positions shown in the relevant Manual; in some countries, a
plate showing the same data is provided in the position (31,
Fig. G).
This information is useful when ordering machine and diesel
engine spare parts. Use the following table to write down the
machine and diesel engine identification data for any further
reference.
OTHER REFERENCE MANUALS
The sweeper is also supplied with the following manuals:
–
–
At Nilfisk-Advance Service Centers the following Manual is
also available:
–
SPARE PARTS AND MAINTENANCE
All necessary operating, maintenance and repair procedures
must be carried out by qualified personnel or by
Nilfisk-Advance Service Centers. Only original spare parts
and accessories must be used.
Call Nilfisk-Advance for service or to order spare parts and
accessories, specifying the machine model and serial
number.
CHANGES AND IMPROVEMENTS
Nilfisk-Advance constantly improves its products and
reserves the right to make changes and improvements at its
discretion without being obliged to apply such benefits to the
machines that were previously sold.
Any change and/or addition of accessory must be approved
and performed by Nilfisk-Advance.
USER MANUAL
MACHINE model ...........................................................
MACHINE serial number ...............................................
ENGINE model ..............................................................
ENGINE serial number ..................................................
Diesel Engine Manual, to be considered as integral part
of this Manual.
Sweeper Spare Parts List
Sweeper Service Manual
3