Environmental Conditions; Wiring Diagram - Nilfisk Advance RS 501 Manuel D'utilisation

Masquer les pouces Voir aussi pour Advance RS 501:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

USER MANUAL
TECHNICAL DATA
AGIP ARNICA
Viscosity at 40°C
Viscosity at 100°C
Viscosity index
Flash point COC
Pour point
Density at 15°C
Climate control system data (optional)
Gas type
Gas quantity

ENVIRONMENTAL CONDITIONS

In the environment where the machine operates, there must not be any danger of explosion.
To avoid inhaling exhaust gas, the machine must be used only where there is a proper air change.
The machine operates correctly (*) in the following environmental conditions:
Temperature: -10°C to +40°C
Humidity: 30% to 95%
(*)
When using the sweeper at a temperature between -10°C and 0°C the dust control system cannot be used; moreover the
water tanks and the dust control system itself must be empty.

WIRING DIAGRAM

(See Fig. AL)
A:
Alternator
AA:
Horn
AS:
Cigarette lighter
B:
12 V battery
B1:
Engine coolant temperature bulb
B2:
Engine oil bulb
B3:
Engine coolant warning light bulb
B4:
Parking brake microswitch
B5:
Lifted hopper microswitch
B6:
Brake light microswitch
B7:
Hydraulic system oil cooler fan bulb
B8:
Reverse gear sensor
BX:
Engine start safety sensor
C1:
Ignition switch
C2:
Combination switch
C3:
Warning buzzer/parking brake buzzer
C4:
Reverse gear buzzer
C5:
Hour counter/revolution counter/water temperature
indicator
C6:
Climate control system compressor
D1:
Diode
D2:
Diode
EV1: Fuel solenoid valve
EV2: Skirt solenoid valve
EV3: Skirt solenoid valve
10
All manuals and user guides at all-guides.com
46
32
mm²/s
45
32
mm²/s
7.97
6.40
/
150
157
°C
215
202
°C
-36
-36
kg/l
0.87
0.865
REFERENCE DATA
ISO-L-HV
ISO 11158
AFNOR NF E 48603 HV
AISE 127
ATOS Tab. P 002-0/I
BS 4231 HSE
CETOP RP 91 H HV
COMMERCIAL HYDRAULICS
Danieli Standard 0.000.001 (AGIP ARNICA22,46,68)
EATON VICKERS I-286-S3
EATON VICKERS M-2950
DIN 51524 t.3 HVLP
LAMB LANDIS-CINCINNATI P 68,P69 e P70
LINDE
PARKER HANNIFIN (DENISON) HF-0
REXROTH RE 90220-1/11.02
SAUER-DANFOSS 520L0463
F1A: Hydraulic system oil cooler fan/skirt solenoid valve
fuse (20 A)
F2A: Fuel solenoid valve fuse (10 A)
F3A: Cab blower/flashing light/windscreen wiper fuse (15 A)
F4A: Dust control system water pump fuse (10 A)
F4A: Dust control system water pump/climate control
system (optional) fuse (20 A)
F5A: Reverse gear buzzer fuse (10 A)
F6A: Warning lights/glow plug control unit fuse (10 A)
F7A: Electric jack warning light fuse (10 A)
F8A: Hopper lid opening/closing electric jack fuse (15 A)
F1B: Hazard warning light fuse (10 A)
F2B: Brake light/horn fuse (10 A)
F3B: Left side running light fuse (10 A)
F4B: Right side running light fuse (10 A)
F5B: Low beam fuse (15 A)
F6B: High beam fuse (15 A)
F7B: Cigarette lighter fuse (20 A)
G1:
Dust control system water level indicator
G2:
Fuel level indicator
I1:
Skirt lifting switch
I2:
Hazard warning light switch
Values
Reclin 134a
0.8 kg
33015501(2)2006-10 A

Publicité

Table des Matières
loading

Table des Matières