Environmental Conditions; Noise Level; Use; Controls And Instruments - Nilfisk Advance SR 1800C B-D Manuel D'utilisation

ENVIRONMENTAL CONDITIONS

Working
The machine should only be used in a suitable environment.
The work environment should be well-lit, should present no
danger of explosions and should be protected from bad
weather conditions.
The machine functions correctly within the following
environmental conditions:
Temperature: -10°C ÷ +40°C.
Humidity: 30% ÷ 95% non-condensed.
Storage
When not in use, the machine should be stored indoor and
protected from bad weather conditions.
Temperature: +1°C ÷ +50°C.
Humidity: maximum 95% non-condensed.

NOISE LEVEL

If the machine is used according to the instructions, the
vibrations do not cause dangerous situations. The machine
vibration level is below 2.5 m/s².
33014817(2)2006-06 A

USE

WARNING!
The machine should be used ONLY by
qualified personnel who know all the machine
controls.
NOTE
Before starting the machine, check the seat
sensor operation: without the operator, the
engine should immediately stop.

CONTROLS AND INSTRUMENTS

SR 1800C D
With headlights
(See Fig. I)
1. Main broom control lever
2. Hopper control lever
3. Skirt control lever
4. Accelerator lever
5. Parking brake lever
6. Ignition switch
7. Warning switch
8. Combination switch
9. Fan control lever
10. Filter shaker switch
11. Brake pedal
12. Drive pedal
13. Warning light instrument panel
13a. Glow plug warning light
13b. Fuel warning light
13c. Battery charge indicator light
13d. Oil pressure warning light
13e. Coolant temperature warning light
13f. Engaged parking brake warning light
13g. High beam indicator light
13h. Running light indicator light
13i. Clogged air cleaner warning light
13j. Turn signal indicator light
13k. Hour counter
14. Fuse box B
15. Fuse box A
16. Optional switch
17. Side broom control lever
18. Hopper overheating buzzer (optional)
USER MANUAL
9