Environmental Conditions - Nilfisk Advance RS 500 Instructions D'utilisation

Diesel engine data
Make
Type
Cylinders
Maximum speed
Maximum working speed
Maximum power at 2,600 rpm
Idle speed
Engine coolant
NOTE
For other diesel engine data/values, see the relevant Manual.
Refuelling data
Fuel tank capacity
Hydraulic system oil tank capacity
Electrical system data
System voltage
Starting battery
Hydraulic system data
Total hydraulic system oil capacity
Maximum drive system pressure
Maximum service system pressure
Hydraulic system oil viscosity (at ambient temperature above +50°F (+10°C)) (*)
(*) If the machine is to be used at ambient temperatures below +50°F (+10°C), the oil should be replaced with equivalent oil
having a viscosity of 32 cSt. For temperatures below +32°F (0°C), use oil with lower viscosity.
Climate control system data (optional)
Gas type
Gas quantity

ENVIRONMENTAL CONDITIONS

– In the environment where the machine operates, there must not be any danger of explosion.
– To avoid inhaling exhaust gas, the machine must be used only where there is a proper air change.
– The machine operates correctly (*) in the following environmental conditions:
– Temperature: +14°F to +104°F (-10°C to +40°C)
– Humidity: 30% to 95%
(*) When using the sweeper at a temperature between +14°F e +32°F (-10°C and 0°C) the dust control system cannot be
used; moreover the water tanks and the dust control system itself must be empty.
33015122(1)2006-02
INSTRUCTIONS FOR USE
1,740/2,900 psi (120/200 Bar)
Values
Lombardini
LDW 1603BZ
3
2,600 rpm
2,200 rpm
24.0 kW (32.18 hp)
900 rpm
50% of AGIP antifreeze
and 50% of water
Values
7.9 US gal (30 liters)
12.6 US gal (48 liters)
Values
12 V
12 V – 80 Ah
Values
17.1 US gal (65 liters)
3,626 psi (250 Bar)
68 cSt
Values
Reclin 134a
1.76 lb (0.8 kg)
9