Description Of The Device; Responsibility Waiver; Safety Precautions - Mectron COMPACT PIEZO LED Mode D'emploi Et D'entretien

COMPACT PIEZO LED
01.2 Û DESCRIPTION OF THE DEVICE
The compact piezo LED is a multifunctional
ultrasonic piezoelectric scaler. It has been
designed in order to offer a product with
innovative design and exclusive technical
characteristics to the operator, and maximum
EN
comfort during the treatment to the patient
thanks to a wide range of possible power
settings.
01.3 Û RESPONSIBILITY WAIVER
The manufacturer Mectron disclaim any
liability, expressed or implied, and shall have
no responsibility for any direct, indirect or
other damages and personal injury arising
out in connection with any errors in the
use of the device and its accessories.
The manufacturer Mectron shall be under no
liability, expressed or implied, with respect to
any damages (personal injury and/or damage
to property) which might arise or be caused,
whether by the customer or by any of the
users of the product and its accessories, as
result of:
1 Use or procedures different than those
specified in the intended use of the
product;
2 The environmental conditions for the
preservation and storage of the device
are not compliant to the precautions
indicated in the Chapter 09 - TECHNICAL
DATA;
3 The device is not used in compliance
with all the instructions and precautions
described in this manual;
01.4 Û SAFETY PRECAUTIONS
WARNING: Contraindications. Do not
use the multipiezo pro on patients who
carry heart stimulators (Pace-makers) or
other implantable electronic devices. This
precaution also applies to the operator.
CAUTION: Contraindications. Ultrasonic
scaler. Do not perform treatments on
prosthetic artifacts made of metal or
ceramics. The ultrasonic vibrations could
lead to the de-cementing of the artifacts.
4
The device has an automatic sync circuit
which optimizes frequency and power
for each available insert, so that the best
performance is always assured. The handpiece
has a LED light 360° adjustable and can be
autoclaved at 135 °C.
4 The electrical system in the premises in
which the device is used is not compliant
to the norms in force and to the relative
precautions;
5 The assembly operations, extensions,
adjustments, updates, and repairs on the
device are performed by personnel not
authorized by Mectron;
6 Improper use, mistreatments, and/or
incorrect interventions;
7 Any and all attempts to tamper with or
modify the device, under any circumstance;
8 Use of non-original Mectron inserts that
entail a finite damage to the threading of
the handpeice, thus compromising correct
operation and causing risk of harm to the
patient;
9 Use of non-original Mectron inserts, used
in accordance to designed and tested
settings of Mectron original inserts. The
correct use of the settings is guaranteed
only with original Mectron inserts;
10 Lack of stock materials (handpiece, inserts,
wrenches) to be used in the event of device
stop due to fault or of inconveniences.
WARNING: Contraindications. Do not
perform scaling treatments without water
spray in order to avoid the insert over-
heating which may cause damages to the
tooth.
Treatments with no water spray can be
carried out only with "Dry Work" inserts
which do not have the water passage.