Disassembly Of Parts For Cleaning And Sterilization; Û Disassembly Of Parts For Cleaning And Sterilization - Mectron COMPACT PIEZO LED Mode D'emploi Et D'entretien

COMPACT PIEZO LED
05 Û DISASSEMBLY OF PARTS FOR CLEANING
AND STERILIZATION
Before moving on to the cleaning procedures
described in Chapter 06 - CLEANING AND
EN
STERILIZATION, disconnect all the accessories
and components of the compact piezo LED.
If present, unscrew the insert from the
handpiece by using the torque wrench;
Disconnect the handpiece from its cord;
CAUTION: Do not attempt to
unscrew or turn the connector when
disconnecting the handpiece.
The connector could get damaged.
Unscrew the front terminal from the
handpiece;
NOTE: on the LED front cone the metal ring
cannot be separated from the plastic cone.
12
WARNING: Make sure that the device
is not active. Always make sure that the
footswitch is not pressed during the
disassembling of parts before cleaning
and sterilization interventions
1
2
3
4