Instructions For Use - Mectron COMPACT PIEZO LED Mode D'emploi Et D'entretien

COMPACT PIEZO LED

04.4 INSTRUCTIONS FOR USE

Correctly connect the handpiece on its
cord making sure to match the dot on the
handpiece connector with the groove on
the cord connector.
EN
Make sure that the electrical contacts of
both connectors are perfectly dry, if need
be, dry them by blowing compressed air;
Screw the chosen insert onto the compact
piezo LED handpiece, until it reaches the
limit stop;
Tighten the insert by using the Mectron
torque wrench.
To correctly use the Mectron torque wrench,
operate as follows:
put the insert inside the wrench as shown;
firmly hold the central body of the
handpiece;
CAUTION:The handpiece must not be
grabbed by its terminal part and/or cord,
but only by its central body.
The handpiece must not be rotated, but
must be grasped firmly, and you must
only rotate the wrench.
rotate the wrench clockwise until the
friction snaps (the external body of the
wrench rotates compared to the handpiece,
emitting mechanical "CLICK" sounds).
The insert is now perfectly tightened.
10
1
2
3
NOT CORRECT
click!
CORRECT