Changing The Sound And Display Settings - Sony MDX-C800REC Mode D'emploi

Masquer les pouces Voir aussi pour MDX-C800REC:
Table des Matières

Publicité

Changing the sound and
display settings
The following items can be set:
Set Up
•Clock (page 9)
•Beep — to turn the beeps on or off.
•RM (Rotary Commander) — to change the
operative direction of the controls of the
rotary commander.
— Select "norm" to use the rotary
commamder as the factory-set position.
— Select "rev" when you mount the rotary
commander on the right side of the
steering column.
•English/Français/Español — to select the
display language.
Display
•D.Info (Dual Information) — to display the
clock and the play mode at the same time (on).
•SA (Spectrum Analyser) — to change the
display pattern of the equalizer display.
•Dimmer — to change the brightness of the
display.
— Select "Auto" to dim the display only
when you turn the lights on.
— Select "on" to dim the display.
— Select "off" to deactivate the Dimmer.
•Contrast — to adjust the contrast if the
indications on the display are not
recognizable because of the unit's installation
position.
•M.Dspl (Motion Display) — to select the
Motion Display mode from "1," "2" and
"off."
•A.Scrl (Auto Scroll) (page 11)
Sound
•Loud (Loudness) — to enjoy bass and treble
even at low volumes. The bass and treble will
be reinforced.
1
Press (MENU).
2
Press either side of (DISC/PRST) repeatedly
until the desired item appears.
Each time you press the (–) side of
(DISC/PRST), the item changes as follows:
Example:
Clock t Beep t RM t English/Français/
Español t D.Info t SA t Dimmer t
Contrast t M.Dspl t A.Scrl* t Loud
* When no CD is playing on a unit with the CD
TEXT function or no MD is playing, this item
will not appear.
3
Press the (+) side of (SEEK/AMS) to select
the desired setting (Example: on or off).
4
Press (ENTER).
After the mode setting is completed, the
display returns to normal play mode.
Note
The displayed item will differ depending on
the source.
Tip
You can easily switch among categories ("Set
Up," "Display," "Sound," "Play Mode," and
"Edit Mode") by pressing either side of
(DISC/PRST) for 2 seconds.
35

Publicité

Table des Matières
loading

Table des Matières