Using The Rotary Commander - Sony MDX-C800REC Mode D'emploi

Using the rotary
commander
The rotary commander works by pressing
buttons and/or rotating controls.
You can also control optional CD/MD units
with the rotary commander.
By pressing buttons
(the SOURCE and MODE buttons)
(SOURCE)
Each time you press (SOURCE), the
source changes as follows:
Radio t CD* t MD t TV* t Radio
* If the corresponding optional equipment is
not connected, these items will not appear.
Pressing (MODE) changes the operation
in the following ways:
• Radio: FM1 t FM2 t FM3 t AM1 t AM2
t FM1
• CD unit*: CD1 t CD2 t ... t CD1
• MD unit*: MD1 t MD2 t ... t MD1
• TV/Video*: TV1 t TV2 t AUX t TV1
* If the corresponding optional equipment is
not connected, these items will not appear.
By rotating the control
(the SEEK/AMS control)
Rotate the control momentarily and
release it to:
• Locate a specific track on a disc. Rotate
and hold the control until you locate the
specific point in a track, then release it to
start playback.
• Tune in stations automatically. Rotate and
hold the control to find a specific station.
(MODE)
By pushing in and rotating the
control (the PRESET/DISC control)
Push in and rotate the control to:
• Receive the stations stored on the number
buttons.
• Change the disc*.
* When an optional CD/MD unit is connected.
33