Storing Tv Channels Automatically; Storing Only The Desired Tv Channels - Sony MDX-C800REC Mode D'emploi

Storing TV channels
automatically
The unit selects the TV channels with the
strongest signals and assigns them to number
buttons in order of their frequency.
Caution
If tuning in a station while driving, use Best
Tuning Memory to prevent accidents.
1
Select "TV" (see "Watching the TV" on
page 36).
2
Press (MENU), then press either side of
(DISC/PRST) repeatedly until "Auto
Mem" appears.
3
Press (ENTER).
The unit assigns TV channels to the number
buttons in order of their frequency.
A beep sounds when the setting is stored.
Notes
• The unit does not assign TV channels with weak
signals. If only a few TV channels with strong
signals can be received, some number buttons
will remain empty.
• When a preset number is indicated on the
display, the unit starts assigning TV channels to
buttons from the one currently displayed.
Storing only the desired
TV channels
You can assign up to 12 channels (6 each for
TV1 and TV2) to the number buttons in the
order of your choice.
1
Select "TV" (see "Watching the TV" on
page 36).
2
Press either side of (SEEK/AMS) to tune
in the TV channel you want to assign to
each number button.
3
Press and hold the desired number
button ((1) to (6)) until you hear a small
beep.
The number button indication and
"Memory" appear on the display.
Note
If you try to assign another channel to the same
number button, the previously assigned channel
will be erased.
37