Table des Matières
Publicité
5
Press (ENTER).
The selected track is inserted at that
program number, and the succeeding
tracks are renumbered.
To continue inserting tracks, repeat steps 3
to 5.
6
Press (MENU) twice.
Note
Once all 24 slots have been filled, "*Mem FULL*"
appears on the display, and you cannot insert
more tracks.
Erasing tracks in a program
1
During CD/MD playback, press (MENU),
then press either side of (DISC/PRST)
repeatedly until "PGM Sel" appears.
2
Press (ENTER).
3
Press either side of (DISC/PRST)
repeatedly to select the program with
the track number you want to erase.
4
Press (ENTER) for 2 seconds.
The selected track is erased, and the
succeeding tracks are renumbered.
5
Press (MENU) twice.
Labeling a CD
(For a CD unit with the CUSTOM FILE
function)
You can label each disc with a personalized
name. You can enter up to 8 characters for a
disc. If you label a CD, you can locate the disc
by name (page 17).
Caution
Do not use the CUSTOM FILE feature while
driving, or perform any other function which
could divert your attention from the road.
1
Start playing the disc you want to label.
2
Press (MENU), then press either side of
(DISC/PRST) repeatedly until "Name
Edit" appears.
3
Press (ENTER).
Name Edit mode
The unit will repeat the disc during the
labeling procedure.
4
Enter the characters.
1 Press the (+) side of (DISC/PRST)
repeatedly to select the desired
characters.
(A t B t C t ··· Z t 0 t 1 t 2 t
··· 9 t + t – t * t / t \ t > t <
t . t
)
If you press the (–) side of (DISC/PRST)
repeatedly, the characters will appear in
reverse order.
If you want to put a blank space
between characters, select "
continue to next page t
— Disc Memo
."
15
Publicité
Chapitres
Table des Matières
Dépannage
