Labeling A Cd; Disc Memo - Sony CDX-MP70 Mode D'emploi

Labeling a CD

— Disc Memo (For a CD unit with the
CUSTOM FILE function)
You can label each disc with a custom name
(Disc Memo). You can enter up to 8 characters
for a disc. If you label a CD, you can locate the
disc by name (page 15).
Caution
Do not use the CUSTOM FILE feature while
driving, or perform any other function which
could divert your attention from the road.
1
Start playing the disc you want to label
in a CD unit with the CUSTOM FILE
function.
2
Press (MENU), then rotate the
./> control dial until "Name Edit"
appears.
3
Press the ./> control dial.
The unit will repeat the disc during the
labeling procedure.
14
./> control
dial
4
Enter the characters.
1 Rotate the ./> control dial to
select the desired character.
A B C
y y ...
+ y – y * ...
* (blank space)
2 Press the M+ button after locating
the desired character.
If you press the –m button, you can
move back to the left.
3 Repeat steps 1 and 2 to enter the
entire name.
5
To return to normal CD play mode,
press the ./> control dial.
Tips
• Simply overwrite or enter "
name.
• There is another way to start labeling a CD: Press
(LIST) for 2 seconds instead of performing steps 2
and 3. You can also complete the operation by
pressing (LIST) for 2 seconds instead of step 5.
• You can label CDs on a unit without the CUSTOM
FILE function if that unit is connected along with a
CD unit that has the function. The Disc Memo will be
stored in the memory of the CD unit with the
CUSTOM FILE function.
Note
Repeat/shuffle play is suspended until the Name Edit
is complete.
Viewing the Disc Memo
As a display item, the Disc Memo always takes
priority over any original CD TEXT information.
To Press
(DSPL) during CD/CD
View
TEXT disc playback
Tip
To find out about other items that can be displayed,
see page 13.
0 1 2
y y y ... y
A
y * y
" to correct or erase a