Sony MDX-C800REC Mode D'emploi page 45

Masquer les pouces Voir aussi pour MDX-C800REC:
Table des Matières

Publicité

CD/MD playback
Problem
A disc cannot be loaded.
Playback does not begin.
A disc is automatically ejected.
The operation buttons do not
function.
The sound skips from vibration.
The sound skips.
Cannot turn off the "--------"
indication.
Recording is not possible.
Recorded sounds drop.
Cause/Solution
•Another MD is already loaded.
•The MD is forcibly inserted upside down or in the wrong
way.
Defective MD or dirty CD.
The ambient temperature exceeds 50°C (122°F).
Press the reset button.
•The unit is installed at an angle of more than 20°.
•The unit is not installed in a sturdy part of the car.
Dirty or defective disc
You cannot label CDs unless you connect a CD unit with the
CUSTOM FILE function.
t Press (LIST) for 2 seconds.
•The MD is protected against erasure. ("Protected" appears.)
t Slide the tab to close the slot (see page 4).
•A premastered MD is inserted in the unit.
t Replace the disc with a recordable MD.
•The time remaining on the MD is insufficient for the
recording. ("Disc FULL" appears.)
t Replace the disc with a recordable MD that has sufficient
time remaining, or erase unnecessary tracks.
•You have started the engine during Timer-off recording or
REC Continue mode.
t Do not start the engine during Timer-off recording or REC
Continue mode.
You have performed the recording while the unit was subject
to excessive vibration (while driving on a rough road, etc.).
45

Publicité

Table des Matières
loading

Table des Matières