Sony MDX-C800REC Mode D'emploi page 14

4
Press (ENTER) momentarily.
5
To continue entering tracks, repeat steps
3 and 4.
6
When you finish entering tracks, press
(MENU) twice.
Notes
• "**Wait**" appears on the display while the unit
is reading the data, or if a disc has not been
inserted into the unit.
• "*Mem FULL*" appears on the display if you try
to enter more than 24 tracks into a program.
• Repeat play and shuffle play will be suspended
until Program Edit mode is over.
Playing the stored program
Changing the disc order on the CD/MD unit
will not affect program memory play.
During CD/MD playback, press (3) (PGM)
to play the stored program.
PGM on y PGM off
To return to normal play mode, select "PGM
off."
Notes
• "NO Data" appears on the display if no track is
stored in the program.
• If a track stored in program memory is not on a
disc in the magazine, the track will be skipped.
• If the discs in the magazine contain no tracks
stored in program memory, or if the program
information has not been loaded yet, "Not
Ready" appears.
14
x
Erasing an entire program
1
During CD/MD playback, press (MENU),
then press either side of (DISC/PRST)
repeatedly until "PGM Sel" appears.
2
Press (ENTER).
3
Press the (–) side of (DISC/PRST)
repeatedly until "All Erase" appears.
4
Press (ENTER) for 2 seconds.
The entire program is erased.
5
Press (MENU) twice.
Adding tracks to the program
1
During CD/MD playback, press (MENU),
then press either side of (DISC/PRST)
repeatedly until "PGM Sel" appears.
2
Press (ENTER).
When adding a track to the end of a
program, skip step 3.
3
Press either side of (DISC/PRST)
repeatedly to select the program number
where you want to insert a new track.
4
Press (SEEK/AMS) to select the new track.
Program No.