Changing The Sound And Display Settings; Menu - Sony CDX-M630 Mode D'emploi

Changing the sound and
display settings

— Menu

The following items can be set:
Set Up
• Clock (page 8)
• CT (Clock Time) (page 19)
• Beep — to turn the beeps on or off.
• AUX-A (page 25) — to turn the AUX source
display on or off.
• RM (Rotary Commander) — to change the
operative direction of the controls of the rotary
commander.
– Select "Normal" to use the rotary commander
at the factory-set position.
– Select "Reverse" when you mount the rotary
commander on the right side of the steering
column.
Display
• D.Info (Dual Information) — to display the
clock and the play mode at the same time (on).
• SA (Spectrum Analyzer) (page 24) — to
change the display pattern of the sound signal
level.
• DEMO (Demonstration) — to turn the
Demonstration mode on or off.
– Select "on" to activate DEMO display.
– Select "off" to deactivate the Demonstration
mode.
• Dimmer — to change the brightness of the
display.
– Select "Auto" to dim the display only when
you turn the lights on.
– Select "on" to dim the display.
– Select "off" to deactivate the Dimmer.
• Contrast — to adjust the contrast if the
indications on the display are not recognizable
because of the unit's installation position.
• BlackOut — to blacken the display, while the
operation mode is on.
– Select "on" to black out the indications.
The indications will disappear, but the unit
will react if you press any button.
– Select "off" to brighten the display.
• A.Scroll (Auto Scroll)
– Select "on" to scroll all automatically
displayed names exceeding 12 characters.
– When Auto scroll is set to off and the disc/
track/album is changed, the disc/track/album
name or ID3 tag does not scroll.
22
Sound
• HPF (High pass filter)
– to select the cut-off frequency to "78 Hz,"
"125 Hz," or "off."
• LPF (Low pass filter)
– to select the cut-off frequency to "78 Hz,"
"125 Hz," or "off."
• Loud (Loudness)
– to enjoy bass and treble even at low volumes.
The bass and treble will be reinforced.
• AUX Level (page 25) — to adjust the volume
level of connected auxiliary equipment.
Play Mode
• AF on/off (Alternative frequences) (page 16)
• Local on/off (Local seek mode) (page 14)
– Select "on" to only tune into stations with
stronger signals.
• Mono on/off (Monaural mode) (page 14)
– Select "on" to hear FM stereo broadcast in
monaural. Select "off" to return to normal
mode.
• Regional on/off (page 16)
1
Press (MENU).
To set DEMO, press (OFF), then press
(MENU).
2
Press M or m repeatedly until the
desired item appears.
3
Press , to select the desired setting
(Example: "on" or "off").
4
Press (ENTER).
After the mode setting is completed, the
display returns to normal play mode.
Note
The displayed item will differ depending on the source.
Tip
You can easily switch among categories by pressing M
or m for 2 seconds.