Setting The Equalizer (Eq7) - Sony CDX-M630 Mode D'emploi

Masquer les pouces Voir aussi pour CDX-M630:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Setting the equalizer (EQ7)

You can select an equalizer curve for 7 music
types (Xplod, Vocal, Club, Jazz, New Age, Rock,
Custom), and off (equalizer off).
You can store and adjust the equalizer settings
for frequency and level.
You can store the EQ7 setting for each source.
Selecting the equalizer curve
1
Press (SOURCE) to select a desired
source.
2
Press (EQ7) repeatedly until the
desired equalizer curve appears.
Each time you press (EQ7), the item
changes.
To cancel the equalizing effect, select "off."
After 3 seconds, the display returns to the
normal playback mode.
Adjusting the equalizer curve
1
Press (MENU).
2
Press M or m repeatedly until "EQ7
Tune" appears, then press (ENTER).
3
Press < or , to select the desired
equalizer curve, then press (ENTER).
Each time you press < or ,, the item
changes.
4
Select the desired frequency and level.
1 Press < or , to select the desired
frequency.
Each time you press < or ,, the
frequency changes as follows:
62 Hz y 157 Hz y 396 Hz y 1.0 kHz
y 2.5 kHz y 6.3 kHz y 16 kHz
2 Press M or m to adjust the desired
volume level.
The volume level is adjustable by 1dB
steps from –10 dB to +10 dB.
To restore the factory-set equalizer curve,
press (ENTER) for 2 seconds.
5
Press (ENTER).
After the effect setting is complete, the
display returns to the normal playback mode.
23

Publicité

Table des Matières
loading

Table des Matières