Setting The Equalizer (Eq7) - Sony CDX-F5700 Mode D'emploi

Masquer les pouces Voir aussi pour CDX-F5700:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Setting the equalizer (EQ7)

You can select an equalizer curve for 7 music
types (XPLOD, VOCAL, CLUB, JAZZ, NEW
AGE, ROCK, CUSTOM and OFF (equalizer
OFF)).
You can store a different equalizer setting for
each source.
Selecting the equalizer curve
1
Press (SOURCE) to select a source
(Radio, CD, MD or AUX).
2
Press (EQ7) repeatedly to select the
desired equalizer curve.
Each time you press (EQ7), the item
changes.
To cancel the equalizing effect, select "OFF."
(With the card remote commander)
Adjusting the equalizer curve
You can store and adjust the equalizer settings
for different tone ranges.
1
Press (MENU).
2
Press (DISC/PRESET) (+) or
(DISC/PRESET) (–) repeatedly until
"EQ7 TUNE" appears, then press
(ENTER).
3
Press (SEEK) (+) or (SEEK) (–) to
select the desired equalizer curve,
then press (ENTER).
Each time you press (SEEK) (+) or
(SEEK) (–), the item changes.
4
Select the desired frequency and level.
1 Press (SEEK) (+) or (SEEK) (–) to
select the desired frequency.
Each time you press (SEEK) (+) or
(SEEK) (–), the frequency changes.
62 Hz y 157 Hz y 396 Hz y 1 kHz
y 2.5 kHz y 6.3 kHz y 16 kHz
2 Press (DISC/PRESET) (+) or
(DISC/PRESET) (–) to adjust the
desired volume level.
The volume level is adjustable by 1 dB
steps from –10 dB to +10 dB.
To restore the factory-set equalizer curve,
press (ENTER) for 2 seconds.
5
Press (MENU) twice.
When the effect setting is complete, the
display returns to normal play mode.
25

Publicité

Table des Matières
loading

Table des Matières