Manually Dispensing Hot Water; Automatically Dispensing Hot Water; Cappuccino Dispensing (Optional) - Astoria Core600 Manuel D'utilisation Et D'entretien

Manually dispensing hot water with
6.9
the AL and AEP versions
• Place the jug under the hot water
nozzle;
• rotate the tap knob anti-clock-
wise;
• the delivery of hot water will be
proportional to the tap's open-
ing;
• to end dispensing, rotate the tap
knob clockwise.
Avoid contact with the hot water nozzle, do
not direct your hands or other body parts
towards the hot water nozzle ends.

Automatically dispensing hot water

6.10
with the SAE and DISPLAY versions
• Place the jug under the hot water
nozzle;
• Press the water button
wait for the hot water to be dis-
pensed;
• To stop the dispensing ahead of
time, press the hot water dispens-
ing button again
button.
To programme the hot water, see chapter
7.2.12 on page 73.
Avoid contact with the hot water nozzle, do
not direct your hands or other body parts
towards the hot water nozzle ends.
62 288
of
and
or press the

Cappuccino dispensing (optional)

6.11
• Put the suction tube in the milk;
• place the jug under the spout of the
cappuccino maker;
• open the steam tap, when the de-
sired amount is reached close the
steam tap;
• pour the latte into the cups with
the coffee.
For warm milk without foam, lift the flap of the cappuccino maker
upwards.
For better results, we suggest not to dispense directly into the
coffee cup, but into a jug or pot, and to then pour the foamed
milk on the coffee.
It is recommended to keep the cappuccino maker constantly
clean according to the instructions of paragraph "8.5 Cleaning
operations" on page 77.
USER manual