Installation And Setting Instructions; Connection Combinations Of Valves And Electronics - Burkert 1094 Instructions De Service

4

INSTALLATION AND SETTING INSTRUCTIONS

4.1

Connection combinations of valves and electronics

Vale type
6022, 6023, 6024, 6223
with tag connectors
with wires
with connector flags
2832, 2834, 2836
with tag connectors
* For proportional valve Type 2822, use only drive electronics Type 1094-
PHR with Order no. 154463
NOTE
Bürkert appliance socket
6021
2821
2822
2822
The use of the Bürkert Type 1610 power supply is
recommended for all combinations!
When connecting the PHR electronics using the appliance
sockets 2506, 2508, 1050 or 1051, note that the cable length
must be less than 50 m; with longer cables, the 0 - 10V control
will no longer produce a full opening of the valve! This can also
apply to other signals.
The direction of the cable run can be changed in 4x 90° steps
when using the cable plug electronics type 1094-PMR.
Control electronics
2506
2508
none
1051
none
1051
1050
none
1094-PHR
1094-PHR
1094-PMR
1094-PHR
1094-PHR*
1094-PHR*
1094-PHR
1094-PMR
1094 - 7