Scope Of Delivery; Load Capacity; Tools For Assembling The System Joint - FIOR & GENTZ NEURO SWING H2O Notice D'utilisation

5.

Scope of Delivery

Description
system ankle joint (without figure)
set 2-component adhesive with primer (fig. 1)
assembly/lamination dummy (fig. 2)
The corresponding spring units and system stirrups have to be ordered separately.
6.

Load Capacity

The load capacity results from the relevant patient data and can be determined by using the Orthosis Con-
figurator. Use the system components determined by the Orthosis Configurator when producing an orthosis
and mind the recommended production technique.
7.

Tools for Assembling the System Joint

Tools
T15 hexalobular screwdriver/bit
T20 hexalobular screwdriver/bit
torque screwdriver 1-6Nm
hexagonal screwdriver with spherical head,
4 x 100mm
hexagonal screwdriver with spherical head,
5 x 100mm
sliding washer centring pin
fig. 1
System Width
12mm 14mm
x -
- x
x x
x -
- x
x x
Quantity
1
1
1
fig. 2
16mm 20mm
- -
x x
x x
- -
x x
x x
21