5. Scope of Delivery
Description
system ankle joint (without figure)
cover plate pressing aid (fig. 2)
AGOMET® F330, 5g (fig. 3)
assembly/lamination dummy (fig. 4)
The corresponding spring units and system stirrups have to be ordered separately.
6. Load Capacity
The load capacity results from the relevant patient data and can be determined by using the Orthosis Con-
figurator. Use the system components determined by the Orthosis Configurator when producing an orthosis
and mind the recommended production technique.
7. Tools for Assembling the System Joint
Tools for System Joint Screws
T10 hexalobular screwdriver/bit
T15 hexalobular screwdriver/bit
T20 hexalobular screwdriver/bit
torque screwdriver 1-6Nm
slotted screwdriver 3.5 x 0.6 x 100mm
hexagonal screwdriver with spherical head,
4 x 100mm
hexagonal screwdriver with spherical head,
5 x 100mm
pliers
fig. 2
fig. 3
10mm
12mm
x
-
-
x
-
-
x
x
x
x
x
x
-
-
x
x
Quantity
1
1
1
1
System Width
14mm
16mm
-
-
-
-
x
x
x
x
x
x
-
-
x
x
x
x
fig. 4
20mm
-
-
x
x
x
-
x
x
43