5.
Scope of Delivery
Description
system ankle joint (without figure)
securing pin (fig. 4)
for NEURO VARIO-CLASSIC
for NEURO VARIO
AGOMET® F330, 5g (fig. 5)
assembly/lamination dummy (fig. 6)
Appropriate system stirrups have to be ordered separately.
6.
Load Capacity
The load capacity results from the relevant patient data and can be determined by using the Orthosis Config-
urator. Use the system components determined by the Orthosis Configurator when producing an orthosis and
mind the recommended production technique. You will find information on the production techniques in the
section "Online Tutorials" on our website www.fior-gentz.com.
7.
Tools for Assembling the System Joint
Tools for all System Joints
torque screwdriver 1-6Nm
Tools for NEURO CLASSIC
T8 hexalobular screwdriver/bit
T15 hexalobular screwdriver/bit
T20 hexalobular screwdriver/bit
26
fig. 4
System Width
10mm
12mm
x
x
System Width
10mm
12mm
x
-
x
-
x
-
Quantity
1
1
2
1
1
fig. 5
14mm
16mm
x
x
14mm
16mm
-
-
-
-
x
x
fig. 6
20mm
x
20mm
-
-
x