Table des Matières
Publicité
1.1 TECHNICAL DETAILS
GB
Circular sax
Max. cutting height at 45/90°
Saw blade diameter / boring
Rotation speed
Suction Diameter
Output power of motor P2
Table dimensions
Overall dimensions (LxWxH)
Height of the working table
Weight
Noise emission*
No load running
- acoustic pressure LpA
AP1
AP2
- acoustic power LwA
Running in working conditions
- acoustic pressure LpA
AP1
AP2
- acoustic power LwA
Pressure level for each function is inferior of 135 dB(A) . Tolerance of measurement = ± 4dB
Information :
The dust extractor which has to be connected to the machine has to garantee an average air flow of 20 m/s so as a debit of minimum 565 m3/h has to
be obtained on the connection of the machine.
Suction nozzel : 100 mm
* These values are emission levels and do not necessarily ensure safe working conditions. There are connections between the emission levels and
the exposure levels; however, they are not reliable enough to determine whether additional safeguards are necessary. Numerous factors influence the
real levels of exposure such as duration of exposure, the workshop characteristics, other dust and noise sources, i.e. number of similar machines and
manufacturing processes. In addition, the acceptable exposure levels may vary from one country to another. However, this information enables the
machine-user to better evaluate the risks.
Electrical equipment
Supply
Protection
Required power
Plugs
Quality control :
The connecting cable is a conducting cable of H07RNF type with a section of 1,5 mm (2,5 mm if the length exceeds 10 m.)
The plug is standardized and MUST be grounded.
6
40/60 mm
200/30 mm
4800 mn-1
100 mm
1000 W
1060x560 mm
Part 1651
76,6 dB(A)
89,3 dB(A)
88,6 dB(A)
100,9 dB(A)
Each fitting is systematically controlled by the electric Standard EN 60204-1
Work on the electrical appliances must be executed by a qualified technician
Spindle moulder
Shaft diameter
Shaft stroke
Shaft height
6300 mn-1
1060x560 mm
1800 mm x 1260 mm x 1100 mm
850 mm
DIN 45635
Part 1652
76,2 dB(A)
89 dB(A)
83,6 dB(A)
97 dB(A)
Single-phase
230 V ~ 50Hz
Planer-Thicknesser
30 mm
Thicknessing width
85 mm
Planning capacity
80 mm
Releasable advance
Adjustable run
100 mm
1000 W
260 Kg
80,2 dB(A)
86,4 dB(A)
88,7 dB(A)
97,6 dB(A)
400 V +/- 10% ~ 50Hz +/- 1%
20 A
2000 W
2 P + T
259 mm
256x200 mm
7,5 m/min
2,5 mm
6500 mn-1
100 mm
1500 W
1060x270 mm
Part 1650
75,5 dB(A)
79,1 dB(A)
90,9 dB(A)
82,3 dB(A)
82,5 dB(A)
96,7 dB(A)
Three-phase
16 A
1950 W
3 P + T
Publicité
Table des Matières
