4 SEAT/BACK
4.7 Removing/Installing the Seat Positioning Strap
For this procedure, refer to FIGURE 7.
Removing
1.
Remove seat cushion from wheelchair, if necessary.
2.
Remove the mounting screws (A) and locknuts (B) that secures the
seat positioning straps (C) to the wheelchair frame (D).
3.
Remove the existing seat positioning straps from the wheelchair.
Installing
1.
Engage the two halves of the seat positioning strap.
2.
Align the mounting holes on the wheelchair frame and the ends of
the seat positioning strap.
3.
Secure the seat positioning strap to the wheelchair frame with two
mounting screws and washers. Tighten securely.
4.
Reinstall seat cushion onto wheelchair, if necessary.
™
Invacare® MyOn
A
C
D
Seat upholstery
removed for clarity.
FIGURE 7
Removing/Installing the Seat Positioning Strap
74
B
Part No 1167417