Installing/Removing The Spreader Bar - Invacare MyOn Active Manuel De L'utilisateur

4.8 Installing/Removing the Spreader Bar

 For this procedure, refer to FIGURE 8.
To remove spreader bar, reverse this procedure
1. Remove the end caps from the back canes.
2. Remove the handles (A) from the back canes (B).
3. Install the inserts (C) into the back canes.
4. Secure the inserts with mounting screws (D).
5. Install the handles on the back canes.
6. Align the spreader bar (E) ends with the handles of the back canes.
7. Secure the spreader bar to the back canes with the mounting bolts
(F).
Part No 1167417
F
A
C
FIGURE 8 Installing/Removing the Spreader Bar
75
4 SEAT/BACK
E
D
Invacare® MyOn
B
™