Removing/Installing Seat Upholstery - Invacare MyOn Active Manuel De L'utilisateur

B
4.2

Removing/Installing Seat Upholstery

Removing Seat Upholstery
 For this procedure, refer to FIGURE 2 on page 68.
To install the seat upholstery, reverse this procedure.
1. Fold the wheelchair. Refer to Unfolding and Folding Wheelchair on page 81.
2. Remove the mounting screws (A) that secures the seat upholstery (B) to the front and back seat rails (C).
3. Remove the endcaps (D) from the front of the seat rails.
4. Slide the seat upholstery out of the seat rails.
Part No 1167417
A
D
FIGURE 1 Removing/Installing the Back
67
4 SEAT/BACK
C
™
Invacare® MyOn