W-Dmx™ Status - Cameo ZENIT W300 Manuel D'utilisation

W-DMX™ STATUS
W-DMX™ W-DMX™
deactivated activated as
receiver,
not paired
SETTING DMX START ADDRESS (DMX ADDRESS)
Press MODE to access the selection menu. Using the UP and DOWN controls, select the menu item "DMX address" (observe arrow) and
confirm with ENTER. The display will show a three-digit number field and you can use the UP and DOWN controls to configure the desired
DMX start address. Confirm the entry with ENTER and press MODE to return to the main display (in the example, "DMX address 001").
---------------- Menu ----------------
DMX Address
DMX mode
Stand Alone
Slave
Settings
System Info
CONFIGURING DMX MODE (DMX Mode)
Press MODE to access the selection menu. Using the UP and DOWN controls, select the menu item "DMX Mode" (observe arrow) and con-
firm with ENTER. In the sub-menu, you can now select between 9 different DMX operating modes with the UP and DOWN buttons. Confirm
your selection with ENTER. Tables with the channel assignments can be found in these instructions under DMX CONTROL.
---------------- Menu ----------------
DMX Address
DMX Mode
Stand Alone
Slave
Settings
System Info
SETTING STANDALONE MODE
Press MODE to access the selection menu. Use UP and DOWN to select the menu item "Stand Alone" (observe arrow) and confirm with EN-
TER. In the sub-menu you can now select from the standalone modes "Auto", "Colour Macro", "Static", "Tunable White" and "User Colour"
as well as the timer function "Timer" using UP and DOWN. Confirm your selection with ENTER.
---------------- Menu ----------------
DMX Address
DMX mode
Stand Alone
Slave
Settings
System Info
W-DMX™
W-DMX
activated as activated and
receiver and is coupled to
is coupled to device,
device, no DMX signal
Transmitter is
switched off or
out of range
001
– DMX Address
001
5xx
------------ DMX MODE ------------
15CH Full Access
10CH Full Access
8CH 8Bit
8CH User-Calibrated
6CH Factory-Calibrated
4CH User-Calibrated
3CH Factory-Calibrated
3CH Color Macro
2CH CCT Factory-Calib
------------ Stand Alone -----------
Auto
Color Macro
Static
Tunable White
User Color
Timer
G3
W-DMX™ W-DMX™ and
activated as transmission
receiver and mode G3 is
is coupled to enabled
device, Up arrow =
DMX signal is Send operation
present Arrow Down
= Receive
operation
Arrow flashes=
pairing process
Flashing stops =
paired
G4S
W-DMX™ and
transmission
mode G4S is
enabled
Up arrow =
Send operation
Arrow Down
= Receive
operation
Arrow flashes=
pairing process
Flashing stops =
paired
7