Installation; Optional Accessories - Cameo ZENIT W300 Manuel D'utilisation

INSTALLATION AND MOUNTING
Thanks to its integrated plastic feet, the lamp can be positioned in a suitable location on a level surface. on a traverse is carried out with an
Omega bracket, mounted in the centre of the base of the device (A). A Omega bracket is included. Suitable beam clamps are available as an
option. Ensure firm connections and secure the spotlight to the securing lug (B) with a suitable safety cable. Beam angle of the LED unit is
independent of the device and is adjusted with the side-mounted thumb screws.
Important: Overhead mounting requires extensive experience, including the calculation of the load limit values of the installation material
and regular safety inspection of all installation materials and spotlights. If you do not have these qualifications, do not attempt to perform an
installation yourself. Refer instead to a qualified professional.

OPTIONAL ACCESSORIES

CLZW300B2004B
Barn doors – Tool-free installation by spring-loaded locking pins,
safety cable included
CLZW300B200SMLSD40
45° diffuser
Tool-free installation via SNAPMAG technology
®
B
A
CLZW300B200SMLSD20
25° diffuser
Tool-free installation via SNAPMAG
CLZW300B200SMLSD100
100° diffuser
Tool-free installation via SNAPMAG
technology
®
technology
®
13