Set-Up And Installation - Cameo CLOXW Manuel D'utilisation

Control
Settings
Info
Service
If the Quicklight mode is activated, the display does not automatically change to the main display; when leaving the Quicklight menu, Quicklight
Quicklight
mode is automatically terminated. The settings in the Quicklight menu are retained until the next restart of the spotlight; as a result,
Help
Quicklight can be accessed repeatedly with the same settings as long as the spotlight remains switched on. After restart, the values in the
Quicklight settings are reset (PAN = 127, TILT = 127, DIMMER = 000, ZOOM = 127, FOCUS = 127).
------------------- Menu ------------------
Control
Settings
HELP (Help menu)
Info
In the Help menu you will find three pages with 1. Information on quick commands that take you directly to specific menu items, 2.
Service
Information on the division of the display into control panels in the main menu and sub-menus, and 3. Information about the device itself.
Quicklight
Starting from the main display, press the rotary-push encoder to enter the main menu. Select Help by turning the encoder and press the
Help
encoder to confirm. Select the desired information again by turning the encoder.
------------------- Menu ------------------
Control
Settings
Info
Service
Quicklight
Help

SET-UP AND INSTALLATION

Thanks to its integrated rubber feet, the spotlight can be positioned in a suitable location on a firm and level surface. Traverse installation
can be achieved with the help of two Omega brackets, which are attached to the base of the device
Suitable beam clamps are available as an option. Ensure firm connections and secure the spotlight to the securing lug with a suitable safety
cable B .
Important: Overhead mounting requires extensive experience, including the calculation of the limit values for load, the instal-
lation materials and regular safety inspection of all installation materials and spotlights. If you do not have these qualifications,
do not attempt to perform an installation yourself. Refer instead to a qualified professional.
20
Control
Default Values
Reset
Settings
Test
Info
LED Calibration
Service
Reset Service Runtime
Quicklight
USB Update
Help
Password
------------------- Menu ------------------
--------------- Quicklight --------------
Control
Pan 000 - 255
Settings
Tilt 000 - 255
Info
Dimmer 000 - 255
Zoom 000 - 255
Service
Focus 000 - 255
Quicklight
Help
------------------ Help --------------------
Shortcuts
Turn encoder in the home screen
to change the DMX address
Push & turn right to jump to the
latest selected menu point
Push BACK for 3 seconds to jump to
the home screen without saving
B
Pan 000 - 255
Tilt 000 - 255
Dimmer 000 - 255
Zoom 000 - 255
Focus 000 - 255
------------------ Help --------------------
Shortcuts
Turn encoder in the home screen
to change the DMX address
Push & turn right to jump to the
latest selected menu point
Push BACK for 3 seconds to jump to
the home screen without saving
------------------ Help --------------------
Touchscreen
In home screen: Press left upper corner to jump
into main menu or symbols for appropriate point
In menu: Each area works as button for
navigating
Back Enter
Cameo
Opus XW
. 2 x Omega brackets are included.
A
Cameo® is a brand of the Adam Hall Group
www.adamhall.com
A
A
------------------ Help --------------------
Touchscreen
In home screen: Press left upper corner to jump
into main menu or symbols for appropriate point
In menu: Each area works as button for
navigating
Back Enter
Cameo
Opus XW
Cameo® is a brand of the Adam Hall Group
www.adamhall.com