Dimensions And Materials - ABB FXL5000 Manuel De Mise En Service, D'opération Et D'entretien

3

Dimensions and materials

The Miniflow has a thread as defined in ISO228 or a NPT thread as process connection . The difference
in diameter at the transition between piping and measuring equipment should be as small as possible.
As one option, adapters are available. These can be screwed onto the process connection thread and
extend the ISO threads listed in the table without increasing the installation length.
The following adapters are available:
Extension from G¾" to G1"
Extension from G 1¼" to G 1½"
Extension from G 2½" to G 2¾"
Fig. 3:
Materials/process connection
Liner material
Measurement pipe and process connection
Sensor housing
Material of measurement/earthing electrodes
O-ring (face end)
Converter housing
Colour: sensor
Colour: converter housing
D184B112U04 FXL5000 (Miniflow)
35
Connection
thread
L
Threaded connection as
defined in ISO 228
DN = d Connection
int.
male thread
10 G ¾"
15 G ¾"
25 G 1 ¼"
50 G 2 ½"
Part No. D365B262U01
Part No. D365B262U02
Part No. D365B262U03
88
1
NPT
Connection
male thread
NPT ¾"
NPT ¾"
NPT 1 ¼"
NPT 2 ½"
PVDF, PEEK
DN 50 PVDF; DN 10, 15, 25 PEEK
PP
Hast. C
Viton
Alum die casting
RAL 9002
RAL 7012
3 Dimensions and materials
91
D1
Dimensions
L D1 H1 H2
85 53 127 100
85 53 127 100
100 64 142 109
130 92 171 125
ISO Projection Method E
Weight
kg
0.8
0.85
0.9
1.4
All dim´s in mm
GB 11