Table des Matières
Publicité
Important: Some of the following symbols may be used on your tool. Please study them and learn their meaning.
Proper interpretation of these symbols will allow you to operate the tool better and more safely.
SYMBOLS
NAME
Safety Alert Symbol
Read Your Operator's Manual
Wear eye, hearing
and head protection
Keep bystanders away
Ricochet
Tri-Arc blade
Do not use toothed blade
RPM Decal
Boots
Gloves
No Smoking
Petrol
Oil
Mix Petrol and Oil
English(Original instructions)
SYMBOLS
EXPLANATION
Indicates danger, warning or caution. it means attention!!!
Your safety is involved.
Your manual contains special messages to bring attention to
potential safety concerns as well as operating and servicing
information. Please read all the information carefully to ensure
satification and safe use.
Wear eye, hearing and head protection when operating this
equipment.
Keep all bystanders at least 15m (50 ft) away.
Danger of Ricochet.
Tri-Arc blade is appropriate for this unit and is suited for cutting
pulpy weeds and vines.
This unit is not intended for use with a toothed saw type blade.
Rotational direction and maximum speed of the shaft for the
cutting attachment.
Wear non-slip safety footwear when using this equipment.
Wear non-slip, heavy-duty gloves.
Do not smoke when mixing fuel or filling fuel tank.
Use unleaded petrol intended for motor vehicle use with an
octane rarting of 91([R+M]/2) or higher.
Use 2-stroke oil for air cooled engines.
Mix the fuel mix thoroughly and also each time before refuelling.
Conforms to all regulatory standards in the country in the EU
where the product is purchased.
12
Publicité
Table des Matières
