Working Conditions - Stihl Fs 251 R Notice D'emploi

Masquer les pouces

Les langues disponibles

English

► Never attempt to operate the trim‐

mer / brushcutter with one hand.

To reduce the risk of serious or fatal injuries to

■

the operator or bystanders from loss of con‐

trol:

► Place your right hand on the control handle

and your left hand on the loop handle (see

illustration). Left-handers must follow these

instructions too.

► Wrap your fingers tightly around the han‐

dles, keeping the handles cradled between

your thumb and forefinger (see illustration).

► Position the power tool so that all parts of

your body are clear of the cutting attach‐

ment whenever the engine is running.

► The operator must use a harness as

instructed in this manual,

■ When the unit is mounted with a metal cutting

attachment, the operator must take special

precautions to reduce the risk of severe injury

from loss of control and contact with the cut‐

ting blade:

► The operator must mount the proper deflec‐

tor as instructed in this manual,

► The operator must use a harness,

■ Working with the cutting attachment above

ground level or perpendicular to the ground

increases the risk of severe injury from thrown

objects. It also exposes more of the cutting

attachment and makes the unit more difficult

to control, increasing the risk of injury. To

reduce the risk of serious or fatal injury from

loss of control or thrown objects:

► Keep the cutting attachment at ground

level, parallel to the ground.

■ To reduce the risk of serious or fatal injuries to

the operator or bystanders from contact with

the cutting attachment:

► Keep hands, feet and other body

parts away from the cutting attach‐

ment.

► Never touch a moving cutting attach‐

ment with your hand or any other

part of your body.

■ To reduce the risk of serious or fatal cut inju‐

■ The trimmer / brushcutter should be balanced

23.1

5.7.4

■ Operate your trimmer / brushcutter only under

8.4.

9.1.

■ Your trimmer / brushcutter is a one-person

■ To reduce the risk of injury to the operator,

■ To reduce the risk of fire and explosion:

5 IMPORTANT SAFETY INSTRUCTIONS

► Do not touch the cutting attachment while

the engine is running.

ries to the operator or bystanders from loss of

control, keep proper footing and balance at all

times:

► Make sure you have good balance and a

secure footing at all times.

► Never work on a ladder or while standing

on any other insecure support.

► Take special care in overgrown or wet ter‐

rain and always watch for hidden obstacles

such as tree stumps, roots, rocks, holes

and ditches to avoid stumbling or falling.

► Be extremely cautious when working on

slopes or uneven ground.

► For better footing, always clear away fallen

branches, scrub, cuttings and other mate‐

rial, objects or vegetation that can increase

the danger of slipping, tripping or falling.

► Never operate above waist height.

► Do not overreach.

for proper control and less fatigue during oper‐

ation.

► Adjust the position of the harness to ach‐

ieve and maintain a comfortable and effec‐

tive working position,