Folding Down The Handlebar; Removing And Fitting The Battery - Stihl Rma 348.0 Notice D'emploi

English
► Slightly pull out the rotary knobs (3) and turn
them 90°.
► Raise the handlebar (4) all the way up.+
► Align the handlebar (4) so that the pins (5) of
the rotary knobs align with the desired posi‐
tion.
► Turn the rotary knobs (6) 90°.
The pins of the rotary knobs must engage in
the holes at the same height.
8.2

Folding down the handlebar

WARNING
■ When folding down the handlebar, fingers or
other body parts may get caught between the
parts of the handlebar.
► Work carefully.
The handlebar can be folded down for space-
saving transport and storage.
► Switch off the lawn mower and remove the
batteries.
► Place the lawn mower on a level surface.
► Move the cutting height to position 4.
► Hold the handlebar (1) with one hand at its
highest point, slightly pull out both rotary
knobs (2) and turn them 90°.
► Fold down the handlebar (1). Make sure that
no wires or body parts are caught in it.
12

9 Removing and Fitting the Battery

► Turn both rotary knobs (2) 90°.
► Push the handlebar (1) upward so that the
pins (3) of the rotary knobs engage.
The handlebar is now locked in place.
► Undo the star grip nuts (4).
► Fold down the upper part of the handlebar (5).
The handlebar is folded down.
9 Removing and Fitting the
Battery
9.1 Fitting the Battery
The lawn mower is equipped with two battery
compartments. A replacement battery can be
carried.
► Place the lawn mower on a level surface.
► Open flap (1) as far as it will go and hold it
open.
► Push battery (2) into battery compart‐
ment 1 (3) as far as it will go.
The battery audibly clicks into place and is
locked.
0478-131-9977-A