Folding Down The Handlebar; Removing And Fitting The Battery - Stihl Rma 353.0 V Notice D'emploi

10 Removing and Fitting the Battery

► Switch off the lawn mower and remove the
batteries.
► Place the lawn mower on a level surface.
► Raise the upper part of the handlebar (1).
► Tighten the star knob nuts (2).
► Pull out the rotary knobs (3) partly and turn
them by 90°.
► Raise the handlebar (4) all the way up.
► Align the handlebar (4) so that the pins (5) of
the rotary knobs align with the required set‐
ting.
► Turn the rotary knobs (6) by 90 °.
The pins of the rotary knobs must engage in
the bores at the same height.
9.2

Folding down the handlebar

WARNING
■ When folding down the handlebar, fingers or
other body parts may get caught between the
parts of the handlebar.
► Work carefully.
The handlebar can be folded down for space-
saving transport and storage.
0478-131-9980-A
► Switch off the lawn mower and remove the
batteries.
► Place the lawn mower on a level surface.
► Move the cutting height to setting 4.
► Hold the handlebar (1) with one hand at its
highest point, pull out both rotary knobs (2)
partly and turn them by 90°.
► Fold over the handlebar (1). Make sure that no
wires or body parts are caught in it.
► Turn both rotary knobs (2) by 90 °.
► Push the handlebar (1) upwards so that the
pins (3) of the rotary knobs engage.
The handlebar is now locked in place.
► Undo the star grip nuts (4).
► Fold over the upper part of the handle (5).
The handlebar is now folded down.
10 Removing and Fitting the
Battery
10.1 Fitting the Battery
The lawn mower is equipped with two battery
compartments. A replacement battery can be
carried.
► Place the lawn mower on a level surface.
English
13