Télécharger Imprimer la page

Removing The Battery; Switching The Lawn Mower On And Off; Switching The Drive On And Off - Stihl Rma 353.0 V Notice D'emploi

English
► Open flap (1) as far as it will go and hold it
open.
► Push battery (2) into battery compart‐
ment 1 (3) as far as it will go.
The battery audibly clicks into place and is
locked.
► If a replacement battery is to be carried: insert
the replacement battery into battery compart‐
ment 2 (4).
The battery audibly clicks into place and is
locked.
► Close flap (1).
10.2

Removing the Battery

► Place the lawn mower on a level surface.
► Open flap (1) as far as it will go and hold it
open.
► Press locking lever (2).
Battery (3) is released and can be removed.
► Close flap (1).
11 Switching the Lawn Mower
On and Off
11.1
Activating and Deactivating the
Blade
11.1.1
Activating the Blade
► Do not tilt the lawn mower.
► Place the lawn mower on a level surface.
14

11 Switching the Lawn Mower On and Off

► Press locking button (1) with the right hand
and hold.
► Pull control bar for mowing (2) with the left
hand fully in the direction of handlebar (3) and
hold so the thumb encloses handlebar (3).
The blade rotates.
► Release locking button (1).
► Hold handlebar (3) and control bar for mow‐
ing (2) with the right hand so the thumb enclo‐
ses handlebar (3).
11.1.2
Deactivating the Blade
► Release the control bar for mowing.
► Wait until the blade is no longer turning.
► If the blade continues to turn: remove the bat‐
teries and consult a STIHL specialist dealer.
The lawn mower is defective.
11.2

Switching the Drive On and Off

11.2.1
Engaging Self-propulsion
The lawn mower speed can be continuously
adjusted from 1.6 km/h to 4.5 km/h. In this posi‐
tion
, the lawn mower drives at the highest
speed. In this position
at the lowest speed.
The set speed influences the battery life. The
lower the speed, the longer the battery life.
► Place the lawn mower on a level surface.
► Activate the blade,
► Pull control bar for self-propulsion (1) fully in
the direction of handlebar (2) and hold so the
thumb encloses handlebar (2).
The lawn mower starts moving.
► Move lever (3) to the desired position.
, the lawn mower drives
11.1.1
0478-131-9980-A

Dépannage

loading