Removing And Fitting The Battery; Switching The Lawn Mower On And Off; Activating The Blade - Stihl Rma 353.0 Notice D'emploi

10 Removing and Fitting the Battery

► Switch off the lawn mower and remove the
batteries.
► Place the lawn mower on a level surface.
► Move the cutting height to position 4.
► Hold the handlebar (1) with one hand at its
highest point, slightly pull out both rotary
knobs (2) and turn them 90°.
► Fold down the handlebar (1). Make sure that
no wires or body parts are caught in it.
► Turn both rotary knobs (2) 90°.
► Push the handlebar (1) upward so that the
pins (3) of the rotary knobs engage.
The handlebar is now locked in place.
► Undo the star grip nuts (4).
► Fold down the upper part of the handlebar (5).
The handlebar is folded down.
10 Removing and Fitting the
Battery
10.1 Fitting the Battery
The lawn mower is equipped with two battery
compartments. A replacement battery can be
carried.
► Place the lawn mower on a level surface.
0478-131-9979-A
► Open flap (1) as far as it will go and hold it
open.
► Push battery (2) into battery compart‐
ment 1 (3) as far as it will go.
The battery audibly clicks into place and is
locked.
► If a replacement battery is to be carried: insert
the replacement battery into battery compart‐
ment 2 (4).
The battery audibly clicks into place and is
locked.
► Close flap (1).
10.2 Removing the Battery
► Place the lawn mower on a level surface.
► Open flap (1) as far as it will go and hold it
open.
► Press locking lever (2).
Battery (3) is released and can be removed.
► Close flap (1).
11 Switching the Lawn Mower
On and Off
11.1

Activating the Blade

► Place the lawn mower on a level surface.
English
13