9 Removing and Fitting the Battery
► Switch off the lawn mower and remove the
batteries.
► Place the lawn mower on a level surface.
► Move the cutting height to setting 4.
► Hold the handlebar (1) with one hand at its
highest point, pull out both rotary knobs (2)
partly and turn them by 90°.
► Fold over the handlebar (1). Make sure that no
wires or body parts are caught in it.
► Turn both rotary knobs (2) by 90 °.
► Push the handlebar (1) upwards so that the
pins (3) of the rotary knobs engage.
The handlebar is now locked in place.
► Undo the star grip nuts (4).
► Fold over the upper part of the handle (5).
The handlebar is now folded down.
9
Removing and Fitting the
Battery
9.1
Fitting the Battery
The lawn mower is equipped with two battery
compartments. A replacement battery can be
carried.
► Place the lawn mower on a level surface.
0478-131-9978-A
► Open flap (1) as far as it will go and hold it
open.
► Push battery (2) into battery compart‐
ment 1 (3) as far as it will go.
The battery audibly clicks into place and is
locked.
► If a replacement battery is to be carried: insert
the replacement battery into battery compart‐
ment 2 (4).
The battery audibly clicks into place and is
locked.
► Close flap (1).
9.2
Removing the Battery
► Place the lawn mower on a level surface.
► Open flap (1) as far as it will go and hold it
open.
► Press locking lever (2).
Battery (3) is released and can be removed.
► Close flap (1).
10 Switching the Lawn Mower
On and Off
10.1
Activating and Deactivating the
Blade
10.1.1
Activating the Blade
► Do not tilt the lawn mower.
► Place the lawn mower on a level surface.
English
13